1: Professional Articles About Crude Oil Pump Series
Image caption: Twin screw pump unit installed at oil gathering station for stable crude transfer Alt: crude oil pump twin screw unit for oilfield crude transfer
A reliable crude oil pump is essential for oilfield fluid transportation. Oilfield production depends on stable fluid transfer solutions to move crude from wellheads, tanks and pipelines to separation facilities and storage areas.
Crude varies greatly from site to site. Some streams are thin light crude, while others are thick heavy crude mixed with water and gas. Choosing the wrong pumping equipment will lead to heavy vibration, flow loss and frequent breakdowns.
This series mainly adopts twin screw pump structure, a positive displacement design widely used for complex oilfield working conditions. If you need detailed performance data, check our pump specification sheet.
Our equipment is manufactured following industry standards for oilfield fluid transfer.
H2: How This Oil Transfer Pump Works
This crude oil pump is purpose-built industrial equipment for transporting unrefined crude under variable pressure and temperature.
It differs from common pumps for clean lubricants or finished fuel. It is engineered to handle solid impurities, shifting viscosity and intermittent gas slugs inside the medium.
Different pump styles suit different scenarios:
- Twin screw design: low pulsation, ideal for multiphase crude
- Gear pump: small flow, high-viscosity service
- Centrifugal pump: large-volume, clean light crude
Our core offering is the twin screw type, balancing steady flow and strong medium tolerance.
Image caption: Internal structure diagram of twin screw pump, showing screw rotors and timing gears Alt: twin screw crude oil pump internal structure
H2: Main Performance Advantages
Low pulsation is its standout feature. Timing gears separate the rotors to avoid metal contact. Sealed progressive cavities push the crude smoothly.
This gentle flow brings practical benefits:
- Reduced pipeline vibration and leakage risk
- Stable readings for flow and pressure instruments
- Less wear on valves, seals and piping
- Consistent feed to separation and treatment units
The pump adapts well to changing working conditions. It works reliably with light crude, heavy crude and three-phase oil-water-gas flow, even when backpressure fluctuates.
Great self-priming ability makes it suitable for tank suction and well-site gathering. Pre-treatment equipment is not always required.
H2: Typical Oilfield Application Scenarios
This pumping system serves upstream and midstream oilfield operations:
- Wellhead gathering and boosting
- Tank farm loading & unloading
- Multiphase transfer before separators
- Heavy crude and viscous oil pipeline transport
- Onshore and offshore crude handling
For sites with frequently changing medium properties, the twin screw layout is the preferred option. We can deliver the equipment as a fully assembled skid pumping unit.
Image caption: Complete skid assembly with base, sealing system and control accessories Alt: crude oil pump skid for gathering station
H2: Guide to Selecting the Right Model
When selecting suitable pumping equipment, we evaluate your site parameters first. We normally collect these details for quotation:
- Medium type: light crude, heavy crude or multiphase mix (oil/gas/water ratio)
- Viscosity range
- Required flow and discharge pressure
- Operating temperature
- Installation style: standalone unit or skid-mounted
- Material requirements for corrosive service
Our engineering team will match rotor design, seal configuration and material after receiving your parameters. Custom design is available for special operating environments.

H2: Daily Maintenance Suggestions
Simple routine inspection helps avoid unexpected shutdowns:
- Inspect seal status and lubrication regularly
- Watch for abnormal noise and vibration
- Prevent dry running without liquid medium
- Clean suction filters on schedule
- Replace wearing components according to running hours
Proper maintenance extends service life and lowers long-term operating cost.
H2: Frequently Asked Questions
H3: Twin screw pump vs centrifugal pump
The choice depends on your medium. Centrifugal pumps perform best for large-volume clean light crude.
If your crude carries gas or has unstable high viscosity, the twin screw crude oil pump runs far more consistently and will not suffer sudden capacity drop when gas enters.
H3: Can it handle gas mixed inside crude?
Yes. This twin screw model is built for multiphase flow and can transfer oil-gas-water mixtures directly in gathering pipelines.
H3: Can you supply full skid packages?
Yes, we provide pre-assembled skid units with base, filters, valves and control parts for quick field installation.
H2: Get Your Custom Pumping Plan
If you are sourcing durable, low-pulsation crude transfer equipment for oilfield projects, feel free to contact us.
Share your working condition data, and our engineers will prepare a tailored solution and quotation.

