Oilfield crude transfer often brings tough headaches. Crude viscosity shifts wildly. Slugs of oil, gas and water hit pipelines unexpectedly. Many pumps create strong flow pulsation, shaking pipes, damaging instruments and triggering frequent shutdowns.
Our twin screw crude oil pump solves these common pain points. It is a positive displacement pump built for steady, reliable crude oil transport across changing working conditions.
H2: Why Low Pulsation Matters for Crude Oil Transport
Most oil operators overlook flow pulsation until something breaks. Sharp pressure pulses vibrate piping joints, wear out seals and mess up flow meters.
This twin screw pump uses timed, non-contacting screw rotors. It pushes crude through continuous sealed chambers. The output flow stays smooth and stable, with nearly no pulsation.
What that means for your site:
- Less pipe vibration and fewer leak risks
- More accurate readings from flow and pressure instruments
- Longer service life for valves, sensors and piping fittings
- Smoother operation for downstream separation units
H2: Strong Adaptability for Complex Crude Conditions
Crude oil is never the same everywhere. It can be thin light crude, thick heavy crude, or mixed with gas and water. Centrifugal pumps struggle with these changes. They lose capacity fast when viscosity or gas content rises.
Our twin screw crude oil pump handles a wide operating window:
- Works with light crude, heavy crude and bitumen
- Tolerates oil-gas-water multiphase flow without pre-separation
- Runs steadily across a broad viscosity range
- Good self-priming performance, suitable for tank suction and wellsite transfer
- Maintains stable flow even when backpressure fluctuates
You do not need to change pumps or add extra buffer tanks for different crude batches. One pump covers more of your transfer tasks. This cuts extra equipment cost and simplifies your layout.
H2: How the Twin Screw Crude Oil Pump Works (Simple Version)
Two precision-machined screw rotors rotate side by side inside the pump casing. External timing gears keep the screws from touching each other.
As the screws turn, closed fluid cavities form between screw threads and the pump body. Crude enters these cavities at the suction port. The rotating screws carry the crude toward the discharge side and build pressure gently.
No metal-to-metal contact between rotors. That design reduces wear and lets it run with poorly lubricated multiphase crude.
H2: Typical Oilfield Applications
This low-pulsation twin screw pump fits many midstream and upstream crude transfer jobs:
- Wellsite crude gathering and transfer
- Crude tank farm loading and unloading
- Multiphase crude boosting before separators
- Heavy crude and fuel oil pipeline transfer
- Onshore oil station and offshore platform crude handling
H2: Key Advantages At A Glance

✅ Near pulse-free flow to protect your pipeline and instruments ✅ Excellent medium adaptability for varying crude and gas content ✅ Reliable self-priming capability ✅ Low internal rotor velocity for gentle fluid handling ✅ Stable flow rate even under changing discharge pressure ✅ Longer mean time between maintenance stops
H2: Frequently Asked Questions
H3: Is a twin screw pump better than a centrifugal pump for crude oil?
It depends on your fluid. Centrifugal pumps work best for clean, low-viscosity liquid with stable conditions.
If you transfer heavy crude or multiphase oil with gas slugs, the twin screw crude oil pump usually performs far better. It keeps consistent flow and pressure without big efficiency drops.
H3: Does this pump require a crude separator before suction?
Not always. Its multiphase tolerance allows direct feeding from pipelines carrying oil, gas and water mixtures. You can skip or downsize pre-separation equipment in many projects.
H3: Can you customize flow and pressure for our project?
Yes. We configure rotor size, rotation speed, sealing forms and material options to match your required flow, working pressure, crude temperature and medium properties.
H2: Ready To Get A Solution For Your Crude Transfer Project
If you are looking for a low-pulsation crude oil transfer pump that stands up to unstable oilfield conditions, our twin screw crude oil pump is worth reviewing.
Send your working parameters: medium type, viscosity, gas fraction, required flow and pressure. Our engineering team can provide a matched pump proposal and quotation.

